VCI/VMI Series

Direct Heat CO2
Tri-gas Incubator

Direct Heat CO2Tri-gas Incubator

New Face Design: Renovated front door with an ergonomic handle, accompanied with a smooth polished stainless steel interior, and touch screen monitor with high speed processing.Best Suited for cell culture: Much like its predecessor (the CPI series), the VCI/VMI grants an ideal environment for cell culture. Further advancements have been made to simplify user maintenance, while allowing safe & easy access to the samples inside.

Dry Heat Sterilization(160C)

Standard Equipped

Considering the effects of the various techniques of sterilization on the cells, Dry Heat Sterilization is the most ideal method used for incubators.

Easily Accessible

Cell Monitoring System (Optional)

Users can connect to an optional, built in, cell monitoring system and observe the culture process on the front door panel display.

Compatibility with cell monitor

● Compatibility with cell monitor recording output via USB.

● Easy to connect and disconnect via single touch connector.

【Applications】

Live/ Timelapse observation

①Live: Allows observation without opening/closing the chamber. Ideal for stress sensitive cells.②Timelapse: Allows periodical recording of cell reproduction curve. Tracing patterns in segments of cell formation and density.

【Applications】

Confluency

③Automated evaluation and recording of cell density. Confirmation of passage timing: human evaluation assisted with device evaluation allows confluency evaluation without interference to chamber granting a unified approach and setting to passage timing.

【Applications】

Cell Quality Control

④Continuous analogy is visually graphed and recorded as above. Cell Quality Control: Comparative analysis between previous and present trial. Evaluation of efficiency and error can be easily viewed, quickly noticed, and corrected if needed.

Movie

Specification

VCI-165P120LE/230LE

Exterior dimensions	620 mm x 740 mm x 850 mm/ 24.4 in. x 29.1 in. x 33.5 in. (W x D x H) (Projections not included)
Interior dimensions	W481 mm × D531 mm × H640 mm
Capacity	Approx. 163 L
Outer facing	Electrogalvanized steel sheet (Baked powder coating)
Inner facing	Stainless steel plate (SUS304, SUS430)
Shelf board	W455 mm × D468 mm × H23 mm 4 boards in the standard configuration (10 boards max.)
Access board	φ29 mm (Standard configuration)
Temperature control method	Digital PID control
Temperature control range	Room temperature plus 5°C to 50°C (0.1°C steps)
Temperature control accuracy	±0.1°C
Temperature uniformity	±0.3°C
Temperature control range for dry-heat sterilization	50°C to 160°C (1°C steps)
Temperature uniformity regarding dry-heat sterilization	±3°C
Sterilization temperature setting time	0.1 to 10.0 hours
CO2 sensor	NDIR sensor
CO2 concentration control range	0.0%～20.0%
CO2 concentration control accuracy	±0.1%
O2 sensor	-
O2 concentration control range	-
O2 concentration control accuracy	-
Humidifying method, humidity	Natural evaporation method (Vat water filling), 95% ±4% RH
Safety devices	Over-temperature protection, over-temperature alarm, CO2 alarm, O2 alarm, other various alarms
Product weight	90 kg
Power supply	Single-phase 110-120V AC, 50/60 Hz, or Single-phase 220-240V AC 50/60 Hz, 7.5 A
Power consumption	750 W(max.)
Power consumption (Watt-hour)	75 Wh (at room temperature 25°C, set temperature 37.0°C, stable operation)
Working temperature range	10°C ～ 30°C
Working humidity range	30% ～ 80%RH
Storage temperature range	-20°C ～ 50°C
Storage humidity range	20% ～ 80%RH
Options	Cell monitor Analogue output Alarm contact output Gas guard Door lock Cart Vertical joint bracket Dust collection filter

VMI-165P120LE/230LE

Exterior dimensions	620 mm x 740 mm x 850 mm/ 24.4 in. x 29.1 in. x 33.5 in. (W x D x H) (Projections not included)
Interior dimensions	W481 mm × D531 mm × H640 mm
Capacity	Approx. 163 L
Outer facing	Electrogalvanized steel sheet (Baked powder coating)
Inner facing	Stainless steel plate (SUS304, SUS430)
Shelf board	W455 mm × D468 mm × H23 mm 4 boards in the standard configuration (10 boards max.)
Access board	φ29 mm (Standard configuration)
Temperature control method	Digital PID control
Temperature control range	Room temperature plus 5°C to 50°C (0.1°C steps)
Temperature control accuracy	±0.1°C
Temperature uniformity	±0.3°C
Temperature control range for dry-heat sterilization	50°C to 160°C (1°C steps)
Temperature uniformity regarding dry-heat sterilization	±3°C
Sterilization temperature setting time	0.1 to 10.0 hours
CO2 sensor	NDIR sensor
CO2 concentration control range	0.0%～20.0%
CO2 concentration control accuracy	±0.1%
O2 sensor	Galvanic battery-type sensor
O2 concentration control range	2.0%～80.0%
O2 concentration control accuracy	±0.5%
Humidifying method, humidity	Natural evaporation method (Vat water filling), 95% ±4% RH
Safety devices	Over-temperature protection, over-temperature alarm, CO2 alarm, O2 alarm, other various alarms
Product weight	90 kg
Power supply	Single-phase 110-120V AC, 50/60 Hz, or Single-phase 220-240V AC 50/60 Hz, 7.5 A
Power consumption	750 W(max.)
Power consumption (Watt-hour)	75 Wh (at room temperature 25°C, set temperature 37.0°C, stable operation)
Working temperature range	10°C ～ 30°C
Working humidity range	30% ～ 80%RH
Storage temperature range	-20°C ～ 50°C
Storage humidity range	20% ～ 80%RH
Options	Cell monitor Analogue output Alarm contact output Gas guard Door lock Cart Vertical joint bracket Dust collection filter